LaserPro Mercury 3

Quick specs

25" x 18" (635 mm x 458 mm) working area
Popular all round laser engraver with stable and satisfactory performance
Intuitive control panel allows easy operations
Low maintenance motion system
Emergency button and key-switch adds an extra layer of safety
Pass-through front and rear doors to accommodate oversized working pieces

LaserPro Mercury III carries the fine tradition of the Mercury series to provide stable engraving quality. The servo motor enables fast movement of lens carriage while maintaining accuracy over time, giving you reliable and dependable results. Mercury III is reinforced with new features, including key switch, user-friendly control panel, and SmartCENTER.

Features:

RoHS Compliance
As a market leader and an environment-friendly product manufacturer, GCC is committed to make all-out efforts to preserve the global environment. Our products are compliant with the European Parliament Directive 2002/95/EC, Restriction of Hazardous Substances(RoHS).

Flexible 3D and Stamp Engraving
Advanced print driver with over 200 level gray scales to presents you fabulous 3D engraving output. And through the intelligent stamp engraving mode you can create a fantastic logo stamp.

Closed-loop DC Servo Motor
A Closed-loop DC servo motor can deliver greater continuous shaft power at higher speeds than a stepper of the same frame size. In addition, It can also give far greater accuracy due to the continuous movement, instead of constant stopping and starting.

Auto Focus
Patented Auto Foucus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Auto Focus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.

Pass-through Front/Rear Doors
A design with doors on both ends to accommodate extremely long working pieces without the need for a screwdriver.

Drag-N-Engrave
An exceptionally innovative and user-friendly feature based on servomotor technology simplifies operations and shortens setup time. Simply hand drag the lens carriage to the desired position to be engraved and press the Start button to commence job.

Easy to Use Control Panel
A control panel with coherent hot-key design and graphical icon displays that allows you to change laser parameter settings, set jobs to repeat unlimited times, queue jobs, delete jobs, and more.

Key Switch Emergency Stop
Key switch safeguards the machine from unauthorized use.Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment

Reliable and Made in USA CO2 Lasers
The CO2 laser is a critical part of a laser engraver. GCC Laserpro offers the best and most reliable CO2 laser available in the industry. Synrad* CO2 lasers are built in the United States with the most advanced laser technology. The laser product is proven to be the most reliable brand with tens of thousands of installations all over the world.
* in selected models

Mercury III		ME-12	ME-25	ME-40	ME-T60i
Laser Source		12W	25W	40W	60W
		Sealed CO2 Laser
Cooling		Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
Work Area		25 x 18 in. (635 x 458 mm)
Maximum Part Size (W x L x H)	All doors closed	27 x 19 x 6.5 in. (685 x 482 x 165 mm)
	All doors open	27 x 8 x 6.5 in. (685 x 8x 165 mm)
Table Size		31.1 x 20.9 in. (790 x 530 mm)
Dimensions (WxDxH)		44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
Drive		Closed-loop DC Servo Control
Maximum Speed*		42 IPS
Throughput*		166.3 in² / hr (1072.8 cm² / hr)
Speed Control		Adjustable from 0.1-100% (Up to 16 color-linked speed settings per job)
Power Control		Adjustable from 0 -100% (Up to 16 color-linked power settings per job)
Distance Accuracy		0.254mm or 0.1% of move, whichever is greater
Z-Axis Movement		Automatic
Focus lens		Standard 2.0", optional 1.5", 2.5" & 4.0" available
Resolution (DPI)		Available 125, 250, 300, 380, 500, 600, 760, 1000
Computer Interface		Standard printer port and USB 2.0** port
Compatible Operating Systems		MS Windows
Memory Buffer		32MB standard
Display Panel		4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus
Safety		Class 2 for red pointer
Standard Feature
Auto Focus		V
Red Dot Pointer		V
Pass Through Doors		V
3D and Stamp Mode		V
Facility Requirements
Operation Voltage		Below 40 Watt, 100 -240 Volt AC Auto Switching 40 Watt and above, 200 -240 Volt AC Auto Switching
Power Consumption		700W	880W	1740W	2000W
Air Exhaust System		External exhaust system required,one 4" connection on the back of the machine.

*Speed does not equal to throughput. See dealer or visit www.gccworld.com for more details.
** File transmission at USB 2.0 Full Speed rate
Specifications are subject to change without prior notice.

Mercury 3

Download the PDF

GCC Laserpro---Crystal Clear Effect On Acrylic by Using Defocus Fu

GCC Laserpro---Crystal Clear Effect On Acrylic by Using Defocus